Spicer TPCS Troubleshooting Guide: Older Systems (ECU Bedienungsanleitung PDF herunterladen (Seite 24)

Troubleshooting

Code Description

Code 3C! indicates a faulty speed sensor signal which can be set by one

of two conditions:

• A wiring or sensor connection may cause a 3C! fault after

approximately 15 seconds. Likely causes are wiring problems or

bad connec tions.

• A mis-adjusted or faulty sensor may cause a 3C! fault after 15 to 20

ignition key cycles without any speed signal.

Note: This fault may occur if ignition has been cycled

15 to 20 times without moving the vehicle.

See “Troubleshooting Tips” on page 20 for general guidelines on system

diagnostics.

Code: 3C!

Type: Speed Sensor

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Keine Kommentare

Spicer TPCS Troubleshooting Guide: Older Systems (ECU Bedienungsanleitung Seite 24