Spicer TPCS Troubleshooting Guide Bedienungsanleitung PDF herunterladen (Seite 59)

Service Procedures

Final System Checkout

Use Diagnostic tool to MONITOR SYSTEM.

• Deflate the system by selecting Highway-Unloaded. Upon successfully

achieving Highway-Unloaded, use pressure

gauge to verify tire pressures are within ±3 psig of desired pressure.

• Select Highway-Loaded. Upon successfully achieving Highway-Loaded,

use pressure gauge to verify tire pressures are

within ±3 psig of desired pressure.

• Drive vehicle and verify diagnostic tool display coincides with vehicle speedometer

. If not, recalibrate the pulse/mile

count in the "Modify System Data" section of the diagnostic tool.

Is the vehicle speed calibrated? Yes / No

Use Diagnostic tool to DISPLAY SERVICE CODES.

• Verify no codes have been set during checkout process

(clear if necessary). Exit diagnostics.

Note: If any suspected

issues arise, inflation and deflation to other mode settings is appropriate to aid diagnosis.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 75 76

Keine Kommentare

Spicer TPCS Troubleshooting Guide Bedienungsanleitung Seite 59