Spicer TPCS Troubleshooting Guide Bedienungsanleitung PDF herunterladen (Seite 65)

Service Procedures

Air Filter Change

The "Air Filter Change" illustration shows the location of the air

filter in each wheel valve. This filter must be replaced when-

ever the tire or wheel valve is ser

viced. Use the illustration as

a reference in completing the air filter replacement as follows:

Be sure to use appropriate eye and ear protection.

Do not crush the air filter when installing adjustable

straigh

t thread O-ring adapters.

Note: Air filters should not be cleaned or

reused. Always

replace with a new air filter.

1. Working quickly to prevent air loss, remove the tire

hose assembly from the fitting on

the tire port (near-

est the tire fill valve) of the wheel valve. Plug hose to

prevent air loss (SAE

37 degree flare plug, 3/8" tube

size, 9/16-18 thread).

2. Remove the adapter fitting from the tire port.

3. Use a flat blade screwdriv

er to remove (unscrew

counterclockwise) the air filter from the wheel valve.

Discard the used air filter.

4. Install a new air filter by pressing it straight into

wheel valve

tire port.

5. Clean the adapter, replace and lubricate the O-ring if

necessar

y and reinstall the adapter in the wheel valve

tire port. Tighten to 16-19 lbs. ft.

6. Remove the plug and reinstall the tire hose assembly

to the adapter on

the wheel valve tire port. Torque to

16-19 lbs. ft.

Note: For insta

llation of adjustable straight thread O-ring

adapters, follow instructions in the service manual to

prevent crushing the filter.

WARNING

CAUTION

Adapter

Tire

Hose

Air

Filter

Wheel

Valve

Control Port

Tire Port

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Spicer TPCS Troubleshooting Guide Bedienungsanleitung Seite 65

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Spicer TPCS Troubleshooting Guide